APS-C X-Trans CMOS 4 sensor with primary color filter, 23.5mm x 15.6mm (APS-C). Make use of this advice to understand which products are required photographic equipment and which ones may be put off. It remains to be seen if it will still be able to compete as a high-end professional camera in 2021. Finally, the X-T3 has a 10-bit internal option, although the X-T30 does not provide such a feature. Face and eye tracking, for example, will be considerably simpler and more precise as a result of this.
The X-T3, on the other hand, is larger in every dimension, measuring 132.5 x 92.8 x 58.8mm, and this, along with its larger grip, allows it to hold longer and heavier lenses with more ease than before. Probably the finest comparison of these; there is no BS or pipe dreams, just a few important distinctions shown as they should be, and that’s it. That is one of the most significant distinctions between the two cameras. However, the additional sealing of the X-T3 will assist to safeguard your investment and save you from having to pay for expensive expert cleanings. Due to the fact that my large nose seems to “activate” the touchscreen LCD when I look through the viewfinder, I have it turned off on both cameras for the most part.
When focusing on subjects who move swiftly towards or away from the camera using a non-linear motor, older lenses like the XF 35mm f/1.4 acquire focus more quickly, and focusing is quicker when focusing on subjects who move quickly towards or away from the camera. Furthermore, while tracking demanding topics like as birds in flight, it becomes more reactive. Furthermore, the battery is one of the most important components of a camera, and you should pick cameras based on this fact while shopping. With the X-T3, you will get 390 picture frames, but with the X-T30, you will receive 10 less frames.
When you use a lot of shadow recovery, the fourth generation sensor produces a bit less noise, while the third generation sensor produces a little less noise when you use a lot of high-speed shutter speeds. The examples below, taken from our X-T2 versus X-T3 comparison, will provide you with a decent indication of how the X-T20 compares to the X-T30 in terms of image quality. Furthermore, the frame rate of the X-4k T3’s video is 60 frames per second, while the frame rate of the X-video T30’s is 30 frames per second.
The Fujifilm X-T3 now has a younger sibling in the form of the Fujifilm X-T30. Overall, they are both excellent cameras that can be utilized for a variety of different tasks and situations. The X-single T3’s significant benefit is that it offers far more video editing possibilities than the X-T2.
Yet further benefit is that, in contrast to those of the X-T20, the phase detection pixels of the X-T30 cover 99 percent of the sensor’s surface in all modes except AF Tracking, which has coverage of 91 percent by 94%. The phase detection pixels on the earlier model are focused in the center of the frame, which means that if your subject travels to the outside of the frame, the camera will not be able to follow it as well. For autofocus, the X-T30 is equipped with the same hybrid autofocus technology that is found in the X-T3, which is the most sophisticated version available to date, with processing rates that are 150 percent quicker than those found in models equipped with the Fujifilm X-Trans III sensor. Both cameras are equipped with a very effective phase detection autofocus technology. Nonetheless, since it is a newer model, the X-T30 improves on some of the shortcomings of the X-T3 in several areas.
It employs an area of about 21MP on the sensor while recording in 4K at 30 frames per second in order to provide oversampled 4K footage with complete pixel readout, which is not possible with other cameras. According to Fujifilm, the X-T20 uses line-skipping, which means that the video isn’t as crisp, may suffer from greater aliasing, and exhibits more noise at high ISO settings than the previous model. As a result of our intensive testing with the X-T3, we discovered that Fujifilm was able to enhance several parts of the autofocus system in relation to the X-T2.
When recording 4K video at 60 frames per second, the X-T3 crops the sensor by 1.18x, but when recording at 30 frames per second, it utilizes the complete width of the sensor, much as the X-T30 models. The video from all three cameras is downscaled to 4K from a total of 6K worth of data in order to enhance the overall quality of the recording. When utilizing telephoto lenses at a distance, one function that is presently specific to the X-T30 is non-stop phase detection autofocus, which allows for continuous focusing. The ability to focus 300 percent quicker even when there is a large distance between subjects – for example, when one is in the front and the other is far away – is enabled by this feature. The X-T3 will get this capability as part of its firmware update in April 2019.
Explore why the company’s industry-leading brands, along with its bargain-basement price, make it a good stock to buy in December. As a result, Ford has seized the chance to remake itself, promising $30 billion to make 40 percent of its vehicle sales electric by the end of the decade. In addition to gaining many of the same video characteristics as the X-T3, the X-T30 also obtains 4K video recording in both UHD and DCI formats from material that was previously oversampled at 6K. There is a 0.5-inch electronic viewfinder (EVF) with a magnification of 0.75x in 35mm terms, and a 3.69 million-dot LCD display on the X-T3.
The X-T30 models are equipped with a built-in pop-up flash, whilst the X-T3 models need the use of an external speed-light source (the small EF-X8 is included in the box). All three cameras include a focus switch on the front and a joystick on the back that can be used to shift the autofocus point or navigate through the menu system. Aside from the changes in size and weight, there are a few additional physical distinctions between the two cameras. We should see its street price drop even lower with the arrival of its replacement, which might result in it being even more popular than it is already. Rather than discontinuing the camera, I believe Fujifilm would be prudent to keep it on the market at a discounted price, similar to what Sony has done with its a6000 series cameras, in order to capture a piece of the entry-level market.
However, for three reasons, one of which I did not mention, I will continue to use my X-T3 camera. Dual card slots, ergonomics, and the availability of a battery grip are all important features. The fact that so many of the tiny things that distinguish the X-T3 as the X-T3 prevent me from saving the additional money is discouraging. In Full HD, the X-T3 and X-T30 cameras can capture slow motion video at a maximum frame rate of 120 frames per second at 200 megabits per second. When recording at this speed, the sensor is cropped by 1.29x, enabling the cameras to create images of higher quality.